50 State Legal 2005-09 Mustang GT Edelbrock E-Force 466 HP Stage 1 Complete Street Supercharger Kit with Tuner
Product Reviews for 50 State Legal 2005-09 Mustang GT Edelbrock E-Force 466 HP Stage 1 Complete Street Supercharger Kit with Tuner
Description
Reviews
0% Financing
These all-new Edelbrock E-Force Mustang supercharger systems for the
4.6L 3V will allow you to boost your Mustang to a very impressive 466
hp and 439 ft.-lbs. of torque. These systems are exclusively designed
by Edelbrock to provide instant, reliable, and safe horsepower for a
stock Mustang 4.6L with only 5 psi of boost for minimum stress on your
engine. The core of these systems is the all-new Eaton Gen VI 2300 TVS
supercharger rotating assembly. Eaton's assembly features a 4-lobe
design with 160 degrees of twist for maximum flow, minimum temperature
rise, and quiet operation for excellent drivability. These supercharger
assemblies have been integrated into the intake manifold for a seamless
design with minimal components, eliminating the possibility of vacuum
leaks between gasket surfaces. Edelbrock's unique inverted supercharger
assembly is placed low in the valley, allowing for an incredible
industry-leading 15 in. of intake runner length for maximizing low-end
torque. An integrated bypass valve helps to eliminate parasitic loss
under light throttle for improved mileage potential. These systems
breathe through specially engineered 85mm electronic throttle bodies
matched with the most unique and efficient inlet configuration on the
market. This combination results in a shorter, less restrictive intake
path for improved airflow without the need for a jack-shaft. Keeping
the air cool is a 110 sq. in., high-capacity, air-to-water intercooler
and a dual core, low-temp heat exchanger. These Edelbrock E-Force
Mustang supercharger kits are complete packages which include a
supercharger/intake assembly, fuel injectors, spark plugs, a steel belt
tensioner brace, and a flash tuner with proper calibration.
The
core of the supercharger system is the all new Eaton Gen VI TVS¨
Supercharger rotating assembly. Eaton's assembly features a four lobe
design with 160ˇ of twist for maximum flow, minimum temperature rise
and quiet operation for excellent drivability. The supercharger
assembly has been integrated into the intake manifold for a seamless
design with minimal components, eliminating the possibility of vacuum
leaks between a gasket surface. Edelbrock's unique inverted
supercharger assembly is placed low in the valley, allowing for an
incredible industry leading 15" of intake runner length for maximizing
low end torque. An integrated bypass valve helps eliminate parasitic
loss under light throttle for improved mileage potential.
The supercharger system breathes through a specially engineered 85mm
electronic throttle body matched with the most unique and efficient
inlet configuration on the market. This combination results in a
shorter less restrictive intake path for improved air flow, eliminating
the need for a jack-shaft. Keeping the air cool is a 110 square inch
high capacity air to water intercooler and dual core low temp heat
exchanger. This intercooler is the largest available on the market
today.
Finally...
the Edelbrock E-Force Supercharger system is not just a performance
upgrade, it also has great looks! The supercharger assembly and
matching coil covers are uniquely styled to give your engine
compartment a custom look. All of these components have been black
powdered coated for durability with highlighted fins and Edelbrock logo
for a timeless look.
Edelbrock
E-Force Supercharger Kit For 4.6L Mustang Features:
Complete
system that maximizes efficiency and performance by minimizing air
restriction in and out of the supercharger
Internal
assembly made by Eaton, the same rotors used in the new Corvette ZR-1
Self-contained
oil system with 100,000-mile service interval (no drilling or plumbing
required)
Installs
under the stock hood while maintaining factory accessories
2300cc
(140 cubic inch) Eaton¨ TVS Gen VI Rotor assembly
Unique
intake manifold design with 15" long runners for increased low-end
torque
Complete
package includes supercharger/intake assembly, air inlet with 85mm
throttle body, fuel injectors, air-to-water intercooler, spark plugs,
flash tuner with proper calibration
The
most efficient system available - 466 HP and 439 ft./lbs of Torque on
only 5 lbs. of boost!
Made
in the USA for absolute quality and performance!
We will contact you
for the shipping location after you purchase.