Stage 2.5 Snow Performance Methanol Kit w/ Braided Line
Product Reviews for Stage 2.5 Snow Performance Methanol Kit w/ Braided Line
Description
Reviews
Unlock 50-70 HP on your boosted vehicle while decreasing your air temps
by up to 100 degrees! Increase your pump gas octane by 25 points and
make more power efficiently with a cooler running motor! The Snow
Performance Stage 2.5 Boost Cooler™ water methanol injection kit is
available for all forced induction applications
(Supercharged/Turbocharged). The Stage 2.5 uses the progressive VC-50
controller (52mm Gauge) that proportionally injects more or less water
methanol according to boost pressure. Start and full points are
adjustable for engagement and delivery curve to match what the engine
requires. Proportionally injecting according to boost pressure gives a
accurate delivery of water methanol and allows cooling and performance
improvements over a wide range for improved drivability. Especially
helpful for direct injected engines to remove 100% of carbon build up
on the valves. Recommended for all street/strip driven forced induction
vehicles using a turbo or centrifugal supercharger (Procharger/Vortech)
looking for cooling over a wide range.
The
VC-50 (ISO 9001 Manufactured) controller offers the functionality of a
boost gauge and water methanol controller all in one! Highlighting a
bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED
screen displaying boost, percentage of injection, low level, secondary
stage activation, prime button, and system fault codes directly on the
screen. You can tailor the controller color to match your OEM gauges or
mix and match up to two colors!
This
kit utilizes the only OEM approved water methanol injection pump on the
market with proprietary heat flange, twin seals, and custom motor
winding to run cooler and longer than the competition. The Extreme
Environment™ 300 PSI UHO pump is designed to be in the elements with
O-Ring connections that are then sealed and potted at our Colorado
facility to ensure no moisture can enter the pump internals. Compare
this to pumps that use a pump "sleeve". These sleeves will keep
moisture around the pump unit leading to corrosion as well as trap heat
greatly decrease pump life. The Stage 2.5 comes standard with 100%
methanol resistant components using stainless steel, nickel plating,
EPDM, and hard anodizing to ensure years of continued use. Tie that in
with new Snow Performance ACU-SEAL™ compression fittings for guaranteed
leak free operation even when using 100% methanol. Whether running a
supercharger, turbo, or high compression motor the Stage 2.5 Boost
Cooler™ will make the induction charge colder, denser, and increase 91
octane fuel to 116 octane race gas levels allowing full power all the
time!
Features:
U.S.A.
Made
Adjustable
Progressive Water Methanol Engagement & Monitoring
Digital
Boost Reading (1-50 PSI)
Recommended
For Street Driven Turbo and Centrifugal Supercharger Applications
Supports
1,000+ HP
100%
Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing,
EPDM)
Snow
Performance Hyper-Sonic™ Water Methanol Nozzle
Snow
Performance ACU-SEAL™ Water Methanol Compression Fittings