How To Clean Your Throttle Body and why you need to. A dirty throttle body is the #1 reason for idle problems with aftermarket camshafts!! This is the first step to address the issue.

How To Load A Brenspeed Calibration With The SCT X4 Programmer.

How To Read Your Vehicle Strategy Using The
SCT X2, X3, and X4 Devices.

How To Clean Your Mustangs Mass Airflow Sensor.

How To Identify 2008 Mustang Spark Plugs
If you have a 2008 Mustang you could have 1 of 2 spark plug designs. This article will make it easy for you to decide which one you have.
Click To View The File On How To Determine 2008 Spark Plug Design

Completing A Ford Drive Cycle for OBDII Inspection
This is a brief document found online that explains how to complete the Ford drive cycle before completing an OBDII test after flashing the PCM.
Click To View The Ford Drive Cycle Instructions

3V Spark Plug Removal: Download The Ford TSB
Ford had some issues with the design of earlier 3V cylinder heads. Often the spark plug will break off down in the cylinder head. Below you will find the Ford TSB acknowledging
this and a few pointers to help remove the spark plugs.
Click To View The Ford TSB

How To Clean A Mustang Throttle Body.

April 13, 2009
SCT X3 Tutorial. Brenspeed shows you how to load a tune.

Or download the X3 video here
Click To Watch

The Variables Of Drag Racing
Are you a first time racer? Heading to the track soon? If this is you check out this article on the variables of racing.
Understanding 3V Cams & Rough Idle
So you want that rough idle? Read this important document that explains why Comp Cams phaser limiters should be used in conjunction with rough idle camshafts.
05-09 Mustang 3V Camshaft Test - No Springs Required!
Brenspeed in conjunction with Comp Cams have came up with a great new camshaft that will save you cash on the parts themselves and the install. Don't let the lower cost fool you the cams performed above expectations..

SCT Xcalibrator 2 Training Videos
To try to make your life a little easier we have created some video's to assist you in using your Xcalibrator 2. If you click on the movie titles below you can watch how to load a tune, operate user adjustability, and pull your PCM's strategy. These Video's were taken using 05+ Mustangs.

2005-09 Mustang Power Adder Buyers Guide
Finding the right supercharger or turbo package to meet your needs can be difficult. To assist you in the big decision we have put together this power adder buyer's guide. Our guide will brief you on the basic differences between Paxton, Vortech, Saleen, and our Hellion Turbo.

Locating Your Processor Code
When ordering a custom tune from Brenspeed we will need to know your vehicles processor code. Check this out to see where to locate yours.

Dealer Flash Updates
Brenspeed reports on how to prepare for a dealer flash update and better yet how to avoid it.

2005-08 Mustang Front 02 Sensor Harness Location
One of the most common errors in clutch, header, and turbo installation is re-installing the front 02 sensor harness incorrectly. This article shows you the correct Ford harness routing on 05-08 Mustang GT's.

05-09 Mustang GT Comp Cams Test
Brenspeed reports our findings when testing the Stage 3 camshafts from Comp Cams and the BBK Twin 62mm Throttle Body.

Hellion Installation Tip
The most frequently asked question when installing the Hellion turbo kit is what direction do you clock the turbo. This video tells all and will make your install much more enjoyable.

2005 Mustang GT Zex Nitrous
Take a close look at installing a nitrous system on a 2005 Mustang GT.
ROUSH PerformancePypes Performance ExhaustHot New Mustang Performance Parts!2005-09 Intake & Tuner PackageEdelbrock SuperchargerMustang GT Paxton NOVI 1200 Supercharger "Throwback" Brenspeed Package (05-10)ExhaustVortech SuperchargersOur Services
Our Clients Say About Us
  • Love the custom tuned X3! Thanks Brenspeed!

    P. Seabrink

  • My 2011 GT Now Screams with your tune!

    K. Fidenza

  • My stangs throttle response has never been so fast! Thanks for the custom tune.

    T. Monroe

  • Thanks for the fast shipping and great service!

    C. Friedgen

  • Got the X pipe in two days! Thanks!

    A. Steel

  • My Roush Stage 3 now Screams with the 650R upgrade. Thanks everyone at Brenspeed!

    J. Guster

  • Hands Down The Best Support Ever!!

    R. Morgan