By far the #1 first modification for your 2005-09 Mustang is one of our
aftermarket air intake and custom Brenspeed tune packages. No matter
which air intake package you choose all of them feature a custom
Brenspeed tuned SCT X4. Our custom tunes will give you the fastest
throttle response possible, increased HP, the maximum torque possible
at lower RPMÍs, and often improved MPG. BrenspeedÍs custom tunes are a
far cry from your basic aftermarket tune. We have years of experience
and R&D invested into our tunes to give you more benefits than
just a peak HP gain on the dyno. With multiple modifications performed
to many parameters within the torque management, adaptive learning, and
drive by wire tables it is common to reduce quarter mile ETÍs by as
much as a half second. All
of our packages include one custom tune developed for your Mustang. The
SCT X4 will store the factory tune so you can return the vehicle to
stock at any time.
After
you order our sales department will e-mail you to find out about your
current modifications if any, your Mustang in general, and other
information so we can develop your custom tunes. The custom tunes will
then be loaded on your SCT X4 so all you will have to do when it
arrives is plug it in and allow the custom tunes to load on your
Mustangs PCM. It is that easy!
BBK
AIR INTAKE FEATURES:
High
Flow Cast Aluminum Inlet
CNC
machined MAF housing
High
flow washable air filter
Metal
Heat Shield
Includes
necessary installation hardware & Instructions
SCT
X4 FEATURES:
Full
User adjustability so if you so choose you can adjust idle, axle gear
ratio, tire revolutions per mile, rev limiter, automatic trans shift
points, spark, and air fuel. Your custom tune will not require any of
these changes. We install the features on the programmer as some
customers like access to them.
Read
DTC Trouble Codes & Clear Trouble Codes
On
Screen Data Logging
Ability
to Receive Custom Tunes via E-Mail from Brenspeed
Optional
Drop Down Menu:
Expedite:
This expedites your order to approximately 2 business days. Standard
lead time is 7 business days from when we receive your vehicle
information. Expedite is a good option if you are in a rush to get your
vehicle up and running.
Your Tuning Information:
Your 7 day lead time on tuning does not start until all of your FULL AND ACCURATE
information is submitted regardless of when you made your original
purchase. Once you get the email requesting the information read the
entire email and
DO NOT LEAVE OUT ANY INFORMATION.
If you have a question about your current mods please reply and ask we
are happy to help. Also pictures always help us if you are not sure
what cold air intake or other part is on your vehicle. We understand
that sometimes it takes time for you to be able to provide the
information. That is just fine but also understand we schedule when
tuning is completed and we cannot schedule you until you have provided
the information we need.
Aftermarket Cams/Heads:
If you are running aftermarket camshafts, modified phasers, or modified
cylinder heads we have you covered. Choose this option to get the
calibration optimized for these parts. We have race proven modified
cylinder head and camshaft calibrations.
Note:
If you do not receive an e-mail requesting tuning information in 2
business days please check your spam folder as these typically are sent
out within 1 business day.