Brenspeed Stage 2 600 HP E-Force Supercharger Package 05-2010 Mustang
Product Reviews for Brenspeed Stage 2 600 HP E-Force Supercharger Package 05-2010 Mustang
Brenspeed’s Custom E-Force Supercharger Package Stage 2
Fits 2005 to 2010 Mustang GT Use Drop Down Boxes To Select Correct Year Kit
Select year and if you would like additional upgrades from drop down boxes above.
Brenspeed’s custom E-force supercharger packages will turn your stock Mustang into a tire shredding monster! Just like all of our other turn key supercharger packages the Brenspeed E-Force package provides incredible power, stock like drivability, and everything required to put the power to the ground. Included in our package is the awesome Edelbrock E-Force TVS supercharger, 41lb injectors, GT500 fuel system upgrade, Brisk spark plugs, our custom tuned Brenspeed SCT X3, Edelbrock E-Force cold air induction, 3.25” pulley and correct size serpentine belt (11 to 13 psi depending on RPM & elevation).
Our state of the art performance center has spent a large amount of time developing this package for the customer that wants supercharged but wants the minimum amount of power that one of our custom E-Force packages can offer. Our E-force equipped Mustang GT has not only spent tons of time on our dyno but has been driven daily and raced often. Expect great fuel mileage, instant power at the drop of the pedal, and an awesome looking engine compartment. Our Stage 2 kit is rated at approximately 600 flywheel horsepower on 93 octane fuel. Don’t have access to 93? No problem we have tunes developed for all octanes of premium fuel including the common fuels found over seas! Our Stage 2 kit provides enough power to the ground to put a stock Mustang GT with traction well into the 11’s in the quarter mile and 10's with a modified Mustang. Looking for less power? Check out our stage 1 kit designed for about 40 less horsepower.
Discount & Installation Options
$100 Credit if you are paying cash, check, or money order.
Free stay while you wait for an installation at our furnished Brenspeed Guest House. Bring friends or family you will have plenty of room! Work from the Guest House with our high speed internet or relax watching a DVD on the plasma screen TV. 3 furnished bedrooms, furnished kitchen, grill on the deck, we have you covered!
The core of the system is the all new Eaton Gen VI TVS® Supercharger rotating assembly. Eaton's assembly features a four lobe design with 160° of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between a gasket surface. Edelbrock's unique inverted supercharger assembly is placed low in the valley, allowing for an incredible industry leading 15" of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential.
The system breathes through a specially engineered 85mm electronic throttle body matched with the most unique and efficient inlet configuration on the market. This combination results in a shorter less restrictive intake path for improved air flow, eliminating the need for a jack-shaft. Keeping the air cool is a 110 square inch high capacity air to water intercooler and dual core low temp heat exchanger. This intercooler is the largest available on the market today.
Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! Using the drop down box above you can add matching coil covers that are uniquely styled to give your engine compartment a custom look. All of these components have been black powdered coated for durability with highlighted fins and Edelbrock logo for a timeless look.
Why do the 2005, 2006, and 2009 cost extra? The E-Force supercharger was designed for all years of 3V engines. The coolant system on the 2005 and 2006 model years differs from 07, 08, and 09. Because of this the 05 and 06 model years will require a coolant kit from the drop down box above. The 2009 model years used a different style intake manifold gasket. Because of this you can not re-use your factory intake manifold gaskets and the 2009 Gasket kit will be required using the drop down box above.
NOTE: We suggest keeping your rear wheel torque under 450-460 foot pounds for ultimate engine saftey. This package will typically excede that amount.
ships free to a commercial business location, we will contact you for
the shipping location after you purchase.
Convenient 0% interest Financing Available!
We know how hard it can be to come up with a large amount of money to get that Mustang part you have been wanting. To help solve this problem we have found a great way to get your part now and pay later. Brenspeed can now offer financing options for your performance part and even installation!
The process is simple. Just call us and we can go over your options and how to get 3 months, 6 months, or even 12 months same as cash with 0% interest. Now you can get that intake and tuner or even supercharger now and pay for it later. Even if you do not choose to pay the financing off in say 3, 6, or 12 months GE Money will turn your 3, 6, or 12 month same as cash into a monthly payment with a set interest rate.
The entire approval process only takes 5 minutes once we receive your application. Once you are approved we provide you with your product or service immediately. Call us to receive an application and get all the details on this easy to use financing option.
Call us at 574.594.9559 and simply ask for a financing application. We can answer any further questions you may have at that time.
2005-10 Mustang Edelbrock Superchargers and Upgrades