05-10 Brenspeed JLT Drivers Side Oil Separator Can for Roush M-90
up with JLT to provide a Super Easy Splice In Oil Separator for use
with the ROUSH M-90 Supercharger. If you have a M-90 on your car
then you need this can installed.
The JLT Oil Separator installs easily in the existing Drivers
side valve cover vent line. Complete instructions are provided. Using
common tools, simply remove the Drivers Side vent line, splice
separator in line and reinstall. While this Separator can also be
used on the Passanger side, the Drivers side of the engine produces the
most oil and Brenspeed recomends installing the Separator on the
Drivers Side first.
During the process of venting crankcase pressure back through your
intake track, large amounts of oil, in the form of vapors, can coat
your blower rotors, intercooler fins and even dilute your gas, lowering
its octane level. This happens on all engines and is even worse when
supercharged as crankcase pressures are increased.
To combat this,
JLT has developed an oil separator that is perfect for your Mustang.
Milled from solid billet aluminum this is a rock solid piece. It has a
knurled tank base for easy removal to drain the spent oil and an O ring
seal to prevent any leaks. They then took this unit a step further and
added a metal mesh Filter element. This element collects the vapors
allowing them to grow into droplets and drop into the tank.
The tank holds
1.5 oz of fluid, while that may not sound like a lot, it's so easy to
check and empty you can easily go 2500 miles in between emptying.