Phase 3 Supercharger Kit by ROUSH  for your 2011-2014 5.0L Ford Mustang GT. This kit is calibrated to deliver 675 HP and 585 FT/LB of torque, an increase of 255 HP and 195 FT/LB over stock!

With this much horsepower under the hood, ROUSH Performance went one step further to ensure that the fuel delivery system can meet the increased fuel needs. A Fuel Pump Voltage Regulator and an easy to install Plug-n-Play wiring harness were developed to help protect against extreme fuel-to-air changes and possible engine damage.

The 675 HP Phase 3 Calibrated Supercharger Kit is part of the TVS (Twin Vortices Series) line of superchargers, developed by ROUSH, that have raised the bar for performance, reliability and efficiency. This is the same line that has been used and proven for years in ROUSH-built vehicles. The ROUSH R2300 supercharger features Eaton's TVS technology rotating assembly that delivers more power and better fuel economy in a smaller package for uncompromising performance.


The primary components of the Phase 3 ROUSHcharger Kit include:

ROUSH R2300 2.3L TVS Supercharger
80mm Supercharger Pulley
ROUSH Fuel Pump Voltage Regulator with Plug-n-Play wiring harness
Upper and lower aluminum intake manifolds
Twin 60mm throttle body and matching throttle body spacer
Cold air induction system
High flow fuel rail with 47lb injectors
High efficiency intercooler system
Large full face low temperature radiator
All required fasteners, wiring, brackets, hoses and clamps


The 2011-2014 Ford Mustang GT Supercharger - ROUSH Phase 3 - 675 HP Calibrated Kit is protected by ROUSH Parts limited warranty (ROUSH Supplied Parts Only), which is for 3 years or 36,000 miles from original installation date.


Highlights:

Produces 675 horsepower and 585lb-ft of torque (255 HP gain and 208 lb-ft gain over stock)

R2300 Supercharger featuring Eatons new TVS Technology. The new Twin Vortices Series features four-lobe rotors with high-flow inlet and outlet that allow more air to pass at higher RPMs, resulting in more power

ROUSH Fuel Pump Voltage Regulator to moderate fuel flow and ensure a proper fuel-to-air charge ratio

Plug-n-Play wiring harness where no modifications are needed to the vehicles fuel pump wiring system

Fuel charging assembly with ROUSH designed upper and lower aluminum intake manifolds

High efficiency intercooler system featuring a large full face low temp radiator, oversize coolant degas bottle, high capacity air-to-water intercooler and formed hoses with abrasion-resistant sleeves

Twin 60mm throttle body and throttle body spacer

ROUSH cold air induction system with 110mm MAF, washable/re-usable open element air filter and air dam

Unique High flow fuel rail with 47lb injectors

Bolt on 80mm supercharger pulley

2011-2014 Ford Mustang GT 5.0L-4v engine Ð Manual transmission only (excludes BOSS 302)


NOT approved for sale or installation in the state of California
Part # 421542


Roush TVS Roush Phase 2 Supercharger system 2011 Mustang GT Roush Supercharger 2012 Mustang GT Roush Supercharger 2013 Mustang GT Roush Supercharger 2014 Mustang GT Roush Supercharger

mustang supercharger install

Convenient 0% interest Financing Available!

We know how hard it can be to come up with a large amount of money to get that Mustang part you have been wanting. To help solve this problem we have found a great way to get your part now and pay later. Brenspeed can now offer financing options for your performance part and even installation!

The process is simple. Just call us and we can go over your options and how to get 3 months, 6 months, or even 12 months same as cash with 0% interest. Now you can get that intake and tuner or even supercharger now and pay for it later. Even if you do not choose to pay the financing off in say 3, 6, or 12 months GE Money will turn your 3, 6, or 12 month same as cash into a monthly payment with a set interest rate.

The entire approval process only takes 5 minutes once we receive your application. Once you are approved we provide you with your product or service immediately. Call us to receive an application and get all the details on this easy to use financing option.

Call us at 574.594.9559 and simply ask for a financing application. We can answer any further questions you may have at that time.