Home | GT500 | Fuel & Induction | Air Intake | 2010-14 GT500 Mustang JLT HydroCarbon Plastic Big Air Intake CAIP-GT500-10-HC

2010-14 GT500 Mustang JLT HydroCarbon Plastic Big Air Intake CAIP-GT500-10-HC

Product Reviews for 2010-14 GT500 Mustang JLT HydroCarbon Plastic Big Air Intake CAIP-GT500-10-HC

Description
Reviews

INTAKE TUBE WITH MOLDED IN MAF
The best part of this 2010-2014 GT500 Mustang JLT Big Air is JLT kicked the cool factor up a notch and molded a 123mm MAF housing right in the tube. This makes a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome! Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor.

FINISH
Through an awesome process called Hydrographics, the intake tube is made to look like carbon fiber. The tube is painted and then dipped in a water solution with a carbon fiber print film that adheres to the part when removed. The tube is then clear coated for a durable finish.

HEAT SHIELD
The vacuum formed ABS plastic heat shield blocks engine heat at idle and low speed. It has a weather strip that seals to the hood, and incorporates the fresh air inlet from the grill. It uses a large area to make sure the filter has tons of cool air. Now includes new redesigned heat shield so 2013 GT500's no longer have to move the intercooler pump.(2/25/13)

TUNING
A Brenspeed specific tune is required with this kit.

EASY INSTALL
The design and detailed instructions helps make this an easy install.

KIT INCLUDES:
•JLT Plastic Intake Tube with Hydrocarbon finish
•Silicone Coupler
•5x9 S&B Powerstack Air Filter
•ABS Heat Shield
•HD Clamps & all needed hardware

This is a made to order part and will take up to 10+ business days after ordering to be manufactured.