designed and HUGE! We were able to design this tube to use
all of the available space, the tube is 6" at the filter end and
smoothly tapering down to 4.5" at the Throttle body side.
Keeping the intake tube a half inch bigger than the stock throttle body
in anticipation of aftermarket offerings.
rotational molded plastic heat shield blocks engine heat at idle and
low speed. The intake tube passes through the heat shield to
have a complete seal with the hood acting as the lid to the air
box. Our shield incorporates the fresh air inlet from the
grill for the factory style ram air effect.
tuning is required with this intake system
design, detailed instructions and online video instructions helps make
this an easy install (see Instructions & Videos tabs to
download / view).
RWHP on a stock GT500
on a modded GT500
Black Textured Intake Tube
S&B Powerstack Air Filter
Shield & Fresh Air duct
Clamps & all needed hardware
use only the best air filters made by S&B to our
specifications. We love S&B's tapered flange design and
Powerstack filtered ends. With a huge 6” opening on the tube we needed
a huge filter. The result is a monster 6x9” filter.
product is NOT CARB (California Air Resource Board) Exempt. It is not
for legal sale or use in the state of CA or any other states adopting
CA emission standards and require a CA Executive Order (EO)